If your part needs to reduce weight while carrying significant mechanical loads, aluminum forging can be a strong manufacturing option.
Forging uses pressure to plastically deform aluminum or an aluminum alloy into the required shape. Forged aluminum is often considered for parts that need good mechanical properties, fatigue performance, and structural reliability.
What Is Aluminum Forging?
Aluminum forging is a manufacturing process in which pressure is applied to an aluminum billet or preform so that it plastically deforms into the required shape.
The billet is typically heated before forging to improve formability. Unlike aluminum casting, forging does not require the metal to be fully melted and then solidified inside a mold.
Whether forging is the right choice still depends on the part’s actual operating requirements.
How Does the Aluminum Forging Process Work?
A typical production route can be summarized as:
Billet preparation → heating → forging → trimming → heat treatment → CNC machining → surface finishing and inspection
Production usually begins with an aluminum billet or preform. The material is shaped under controlled conditions using forging equipment and dies, then trimmed and heat-treated as required.
If the finished part includes tight dimensions, close tolerances, or functional surfaces, CNC finish machining is usually required after forging.
You should plan the complete manufacturing route around the finished part requirements rather than treating forging as an isolated production step.
Which Aluminum Alloys Are Commonly Forged?
Aluminum alloys differ significantly in strength, corrosion resistance, fatigue performance, machinability, and heat-treatment response.
| Aluminum alloy | Main characteristics | Common selection direction |
|---|---|---|
| 6061 | Balanced strength, corrosion resistance, and machinability | General industrial and structural parts |
| 6082 | Good strength and machinability | Structural and mechanical components |
| 2024 | High strength and good fatigue performance | High-load components |
| 7075 | High strength-to-weight ratio | High-performance structural parts |
Do not compare strength alone when selecting an aluminum forging alloy. Heat treatment, corrosion exposure, CNC machining requirements, part geometry, and operating conditions are also important.
What Is the Difference Between Open-Die and Closed-Die Forging?
Two common aluminum forging methods are open-die forging and closed-die forging.
| Process | Better suited for | Main characteristics |
|---|---|---|
| Open-die forging | Larger or relatively simple parts | Greater flexibility and suitability for lower production volumes |
| Closed-die forging | Near-net-shape parts with defined geometry | Good repeatability and stronger suitability for batch production |
In open-die forging, the material is not fully enclosed in a fixed cavity. This provides flexibility for large or relatively simple components.
Closed-die forging uses shaped dies to control material flow. It is often more suitable when you need consistent geometry and repeat production.
Why Choose Forged Aluminum Parts?
Aluminum forging can combine low weight with useful mechanical performance.
Aluminum has a lower density than many steel materials. When your part must reduce weight while carrying mechanical loads, forged aluminum may offer a practical balance of weight, strength, and fatigue performance.
If the part has highly complex geometry or internal cavities, casting may be the more suitable process.
Aluminum Forging vs. Aluminum Casting: How Should You Choose?
The choice between aluminum forging and aluminum casting depends on the main engineering requirement of your part. For a more detailed process comparison, see our guide to cast aluminum vs. forged aluminium.
| Comparison factor | Aluminum forging | Aluminum casting |
|---|---|---|
| Complex geometry | More limited | Greater design freedom |
| Mechanical performance | Often higher for comparable applications | Depends on the alloy and casting process |
| Fatigue performance | Often selected for highly loaded parts | Depends on the specific application |
| Internal cavities | Difficult to produce | Easier to produce |
| Secondary machining | Frequently required | Depends on final tolerances |
| Typical selection | Structural and high-load parts | Complex-shaped parts |
Neither process is universally better. The decision should return to the function, geometry, quantity, and performance requirements of the part.
When Should You Consider Aluminum Forging?
Aluminum forging is worth evaluating when your part needs several of the following:
- Lower weight
- High mechanical strength
- Resistance to repeated or cyclic loads
- Good fatigue performance
- High structural reliability
Why Do Aluminum Forgings Still Need CNC Machining?
Forging and CNC machining are complementary processes for many precision components.
Forging creates the basic part shape and supports the required material performance, but it does not mean every feature will meet its final dimensional requirement directly from the die.

When designing the part, identify which surfaces can remain as forged and which critical areas must be CNC machined to final size. Bearing seats, mounting holes, threads, internal bores, sealing surfaces, and tight-tolerance interfaces commonly require finish machining.
Where Are Aluminum Forgings Used?
Aluminum forgings are used in aerospace, automotive, transportation, industrial machinery, and other mechanical equipment.
Typical parts include structural components, brackets, wheels, connectors, and other components that carry mechanical loads.
When you need to reduce weight while supporting significant or cyclic loads, aluminum forging is a process worth evaluating.
How MATSON METAL Supports Forging and Secondary Machining
If your project includes both forged blanks and precision machining, the two production stages should be planned together.
MATSON METAL can review your drawing together with the material, forging preform, CNC machining, tolerances, surface requirements, and secondary operations to evaluate an appropriate manufacturing route.
FAQ
Is forged aluminum always stronger than cast aluminum?
No. Forged aluminum often provides good mechanical and fatigue performance in comparable applications, but the result also depends on the alloy, heat treatment, casting process, part geometry, and service conditions. It is not accurate to assume that every forging is stronger than every casting.
Which aluminum alloys are commonly used for forging?
Common choices include 6061, 6082, 2024, and 7075. The final selection should account for strength, corrosion resistance, fatigue performance, machining, heat treatment, and the operating environment.
Does an aluminum forging always require CNC machining?
No. However, precision parts often require CNC machining for holes, threads, internal bores, sealing surfaces, mating faces, and dimensions with tight tolerances.
When should I choose aluminum forging instead of aluminum casting?
Evaluate aluminum forging when low weight, mechanical strength, fatigue performance, and structural reliability are primary requirements. Casting usually provides more design freedom when complex shapes and internal cavities are more important.